SEC Filings Section 16 Filings Only
 
PFSWEB INC filed this 10-K on 03/30/2012.
« Prev Page Outline Printer Friendly Entire FilingNext Page »


  a. The surface waxed will have had the proper type of wax applied in accordance with the best operating practices.

 

  b. The wax will be applied thinly, uniformly and evenly in such a manner as to avoid skipping of areas, and will be allowed to properly dry before being polished.

 

  c. Walls, baseboards, furniture and other surfaces will be free of wax residue and marks from the equipment. Covering for wall protection will be used in areas where paneling or cloth fabric is found.

 

  d. The waxed area will be free of streaks, mop strand marks, skipped areas, and other evidence of improper wax application.

 

  5. Buffing

 

  a. The waxed or damp-mopped surface shall have dried to the touch after being buffed.

 

  b. Baseboards, furniture and equipment will not be disfigured or damaged during the buffing work.

 

  c. The finished area will be polished to an acceptable, uniform luster.

 

  6. Furniture Arrangements in Waxed Areas

 

  a. All rug edges will be replaced to their proper position.

 

  b. Care will have been exercised to avoid damage to building and/or office equipment during waxing process.

 

  7. Preparation for Floor Scrubbing

 

  a. The machine and other equipment will be checked and readied for work in careful and thorough manner.

 

  b. Cleaning solutions will be mixed thoroughly and in proportions specified without undue spillage of either solution or rinse water.

 

  8. Operation of Machinery

 

  a. The mechanized equipment will be operated only by authorized personnel having sufficient instructions as to its proper and efficient operation.

 

  b. The scrubbing machine will be started and operated in a safe and reasonable manner.

 

  c. Care of the mechanical equipment will be exercised at all times during its operation to avoid damage to personnel, the building, and equipment.

 

  9. Floor Scrubbing and Rinsing

 

  a. Proper precautions will be utilized to inform the building occupants of wet and/or slippery conditions during the scrubbing operation.

 

  b. The scrubbing work will be performed in such manner as to properly clean the floor surface with care taken to see that the proper cleaning solution is used.

 

Renaissance Tower/ Priority Fulfillment Services, Inc.